★★★★★
“Fantastic from start to finish. 19 sockets, bathroom fans and more — they barely left a mark in the house. Polite, professional and lovely to have in my home. Would absolutely recommend anytime.”
// Electrical Testing & Certification //
Electrical Testing & Certification in Cork
RECI and Safe Electric registered electrical testing and certification for domestic and commercial properties across Cork — correct, thorough, and documented.
★★★★★
4.8 · 64 Reviews
·
RECI Registered·Safe Electric Registered
// About This Service //
Cork’s Trusted Electrical Testing Specialists
Haven Electrical carry out electrical installation testing and certification for domestic and commercial properties across Cork City and County. Testing is required after any new installation or major alteration, before occupation of a new building, on change of tenancy, or as part of a periodic inspection regime. We use calibrated test equipment and follow the full inspection and testing schedule required by IS 10101 (the National Rules for Electrical Installations). All test results are recorded and a formal certificate issued — Electrical Installation Certificate (EIC) for new works, or Electrical Installation Condition Report (EICR) for existing installations. We are RECI and Safe Electric registered.
RECI & Safe Electric Registered
Certificates issued by electricians registered with both RECI and Safe Electric — the two recognised certifying bodies under Irish regulations.
Calibrated Test Equipment
All testing carried out with calibrated Fluke multifunction testers. Test results accurate and defensible.
Fast Certificate Turnaround
Certificates typically issued within 2–3 working days of test completion.
All Property Types
Domestic, commercial, and industrial electrical testing across Cork City and County.
// What You Get //
What’s Included in a Full Electrical Test
Visual inspection
Full visual inspection of the installation for visible signs of damage, non-compliance, or deterioration.
Continuity of protective conductors
All earth and bonding conductors tested for continuity to confirm the earthing system is intact.
Insulation resistance testing
Megger insulation test on all circuits to detect deteriorated or damaged cable insulation.
Polarity verification
All sockets, switches, and accessories checked for correct polarity.
Earth fault loop impedance testing
Loop impedance measured at all circuits to verify protection devices will operate within required disconnection times.
RCD operation testing
All RCDs tested for correct operating current and trip time.
Prospective fault current measurement
Prospective short circuit current measured at the incoming supply.
Schedule of test results
Full schedule of test results recorded for every circuit, with pass/fail assessment.
Electrical Installation Certificate
Formal EIC or EICR issued on completion, signed by the responsible electrician.
// SIMPLE PROCESS //
How It Works
1
Fill In The Form
Takes less than 60 seconds. Tell us about your job and where you’re based in Cork.
2
Send Us Photos or a Video
We’ll send you a WhatsApp message so you can show us the job. Helps us give you an accurate quote without a wasted visit.
3
Get Your Quote & Book In
We’ll come back to you within 24 hours with a price. Agree a day and time that suits you — we’ll be there.
// Why Choose Haven //
Get a Free Quote
Why Cork Customers Choose Haven Electrical
Properly Registered
We are RECI and Safe Electric registered. Only registered electricians can legally carry out and certify electrical work in Ireland. We don’t cut corners on registration.
Calibrated Equipment
Test results are only meaningful if the test equipment is calibrated. We use calibrated Fluke test instruments and can provide calibration certificates if required.
Clear Report Explanation
We explain what the test results mean in plain language. If there are observations requiring remediation, we explain what needs to be done and why.
Prompt Turnaround
We understand that building control, property transactions, and insurance deadlines are time-sensitive. We aim to issue certificates within 2–3 working days.
// Customer Reviews //
What Cork Customers Say
★★★★★
“We’re so pleased with the service from Haven Electrical Limited. Everything was handled quickly and efficiently, from the prompt replies to getting us scheduled in right away. The technician Caoilte was professional, friendly, and a pleasure to work with.”
★★★★★
“Sent an email for a quote on Monday. Had a phone call Tuesday morning and had Haven call Thursday! Very happy with the turn around, highly recommend. Very clear on prices and affordable for those small jobs around the house. Will definitely use again!”
// FAQs //
Electrical Testing & Certification FAQs
A full electrical installation test to IS 10101 includes: visual inspection; continuity of protective conductors (earth and bonding); insulation resistance of all cables; polarity verification at all outlets; earth fault loop impedance at all circuits; RCD operating current and time tests; and prospective fault current measurement at the incoming supply. All results are recorded on a schedule and the installation assessed as satisfactory or unsatisfactory based on the results.
An Electrical Installation Certificate (EIC) is issued for new electrical installations or major alterations. It certifies that the work was designed, constructed, inspected, and tested in accordance with IS 10101. An Electrical Installation Condition Report (EICR) is issued for inspections of existing installations. It reports the condition of the installation and classifies observations as C1 (danger), C2 (potentially dangerous), C3 (recommendation), or FI (further investigation).
The time required for a full electrical test depends on the number of circuits in the installation. A typical 3-bed domestic house with 10–15 circuits takes 3–5 hours for a full test and inspection. A large commercial premises with multiple distribution boards can take a full day or more. We advise on expected duration at the time of quotation.
An electrical certificate is not a legal prerequisite for every house sale, but it is strongly recommended and increasingly required by solicitors and buyers. If any electrical work has been carried out since the house was built (rewiring, new consumer unit, extension circuits), the buyer’s solicitor will typically require certificates for that work. If you cannot produce them, a periodic inspection and condition report on the existing installation is often requested as an alternative.
We can certify work that we have ourselves inspected and tested and confirmed to be compliant with IS 10101. We cannot certify work we haven’t tested. If the previous electrician’s work is found to be compliant during our inspection, we issue an EICR confirming satisfactory condition. If it is not compliant, we can carry out any remedial works required and then certify the complete installation.
We use Fluke multifunction installation testers for all electrical testing. These instruments carry out all required tests in a single unit and produce a printed or digital record of all results. Our instruments are regularly calibrated and we can provide calibration certificates on request if required for building control or insurance purposes.
Yes — we understand property transaction deadlines. Contact us directly on 021 203 2045, explain the situation and the deadline, and we will do our best to prioritise the work and issue the certificate within 24–48 hours of the test. For urgent certification, call rather than submitting an online form.
If testing identifies a fault or a C1/C2 observation, we notify you immediately and explain what was found, the risk, and the remedial action required. For C1 faults (immediate danger), we will not leave the premises without making the fault safe or clearly advising isolation of the affected circuit. We can carry out remedial works on the same or a subsequent visit and re-test to confirm the fault is resolved before issuing the certificate.
// Related Services //
Related Services
Periodic Inspections
Condition reports for existing installations in Cork homes and commercial premises. EICR issued.
Learn More →
Safety Certificates
Safety certs for landlords and property sales across Cork. Fast turnaround.
Learn More →
Fault Finding
Systematic electrical fault diagnosis for Cork homes and businesses. Root cause, not just symptoms.
Learn More →
// Free Quote //
Get Your Free Electrical Testing Quote in Cork
RECI & Safe Electric registered · Certificate on completion · Fast turnaround
Get in Touch
021 203 2045
Unit 5, Carrigaline Industrial Estate,
Co Cork
Co Cork
★ 4.8 Google Rating · 64 Reviews
✓ Safe Electric Registered
🏆 All-Ireland Business All-Star